12V car use universal dual computers cpu bi bi sound buzzer with 8 probes sensors alarm parking sens

price: 面议
Total supply:
Delivery term: The date of payment from buyers Deliver within days
seat: Asia-Pacific China
Validity to: Long-term effective
Last update: 2016-10-18 12:02
Browse the number: 245
Company Profile
Product details

Basic Info.
  • Brand Name: JXK 
  • Type: security product for drivers 
  • Material: plastic 
  • Use: 12V car use 
  • probe number: 8(front 4 back 4) 
  • Rated voltage: 12V 
  • Rated current: 10mA ~ 150mA 
  • Detection distance: 0.3~1.5m for rear 
  • Alarm form: bi bi bi from buzzer 
  • oem support: yes 
  • Model No.: JXK-606D 
  • Place of Origin: Guangdong  
  • Min.Order: 100 Piece/Pieces
  • Means of Transport: Land, Ocean, Air
Supply Capacity
  • Production Capacity: 10000
  • Packing:caton(55*37*24 cm)
  • Delivery Date: 15 days


Car parking sensor system

8 sensor probes BIBIBI...buzzer alarm speaker parking sensor system


Details of JXK 606D

8 sensor probes (diameter:22 mm / the lenth of the line:250mm)

1 mian part box built-in dual cpu for accurate working

1 bibibi buzzer for alarm voice sound

1 power line

1 3M for buzzer fix

1 3M for main part box fix 

1 drilling bit for sensor probes installation 


drivers always collide when they are parking,especially new drivers.because they can not see bodies near behind their car.at this time ,they need parking sensor system:bibibi buzzer alarm parking sensor system JXK-606D

first you need to choose 4 position for the sensor probes(about 55-70cm height from ground)

drill 4 holes on your car bumper with the drilling bit

second,in the same way,you must choose 4 position for the 4 sensor probes in the front of your car.

take the 4 sensor probes into these 4 holes and connect their lines with the ports on the main part box inside your car,and take another 4 sensor probes plug into the other 4 ports of the main part box

then take the plug of the bibibi buzzer into the port on the main part box

the same,choose a best position for the buzzer to fix it in your car with the 3M

at last,take the power line plug into the main part box ,and connect the red line with the positive pole of  back-up lamp of your car,connect the orange line with the positive pole of cars brake lamp,connect the white line with ACC of your car,and make the black line ground connection

so its all for installation of all parts

when you take reverse gear,the buzzer parking sensor system would be woke.these 4 sensor probes will sense all bodies back of your car.and will sound alarm voice when the bodies are between 0.3-1.5m far from your car back.you can control cars brake at the right time.

when you take out of teverse gear stautus or take into brake status,the front 4 sensor probes would work for you in the same way

all is keep you safe.

JXK-606Ds Specification
Product Namecar Bibi buzz parking sensor system
Typesecurity product for drivers
Use12V car use 
supportcar taxi
probe number8 (front 4 ,back 4)
Rated voltage12V
Rated current10mA ~ 150mA
Detection distance0.3 ~ 1.5m for rear
Ultrasonic frequency40KHz
Working temperature-30ºC ~ +80ºC
Display formNO
Alarm formbi bi bi…from buzzer
personerly OEM service
diameter of sensor probes22 mm
lenth of the sensor probes250 mm

all parts of 8 sensor probes bibibi buzzer alarm parking sensor system JXK 606D

size of main part box of 8 sensor probes bibibi buzzer alarm parking sensor system JXK 606D

size of buzzer of 8 sensor probes bibibi buzzer alarm parking sensor system JXK 606D

drilling bit of 8 sensor probes bibibi buzzer alarm parking sensor system JXK 606D

sensor probes of 8 sensor probes bibibi buzzer alarm parking sensor system JXK 606D

more»other products

[ Productssearch ]  [ favorites ]  [ Tell friends ]  [ Print ]  [ Close ]

Index: 0-9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z