Publishcurrent position:home » Products » valves fittings » Safety Valves »

Safety Valves (Oil, Gas, Water)

price: 面议
Total supply:
Delivery term: The date of payment from buyers Deliver within days
seat: Asia-Pacific China
Validity to: Long-term effective
Last update: 2016-09-16 06:45
Browse the number: 350
Company Profile
Product details

Quick Details

Structure:SafetyPressure:Low medium high pressure or vacuumPower:Manual pneumatic solenoid
Material:ForgedTemperature of Media:low medium and high tempe...Media:Gas Water Acid Oil


There is a wide range of safety valves available to meet the many different applications and performance criteria demanded by different industries. Furthermore, national standards define many varying types of safety valve.

The ASME standard I and ASME standard VIII for boiler and pressure vessel applications and the ASME / ANSI PTC 25.3 standard for safety valves and relief valves provide the following definition. These standards set performance characteristics as well as defining the different types of safety valves that are used:

  • ASME I valve - A safety relief valve conforming to the requirements of Section I of the ASME pressure vessel code for boiler applications which will open within 3% overpressure and close within 4%. It will usually feature two blowdown rings, and is identified by a National Board 'V' stamp.
  • ASME VIII valve - A safety relief valve conforming to the requirements of Section VIII of the ASME pressure vessel code for pressure vessel applications which will open within 10% overpressure and close within 7%. Identified by a National Board 'UV' stamp.
  • Low lift safety valve - The actual position of the disc determines the discharge area of the valve.
  • Full lift safety valve - The discharge area is not determined by the position of the disc.
  • Full bore safety valve - A safety valve having no protrusions in the bore, and wherin the valve lifts to an extent sufficient for the minimum area at any section, at or below the seat, to become the controlling orifice.
  • Conventional safety relief valve - The spring housing is vented to the discharge side, hence operational characteristics are directly affected by changes in the backpressure to the valve.
  • Balanced safety relief valve - A balanced valve incorporates a means of minimising the effect of backpressure on the operational characteristics of the valve.
  • Pilot operated pressure relief valve - The major relieving device is combined with, and is controlled by, a self-actuated auxiliary pressure relief device.
  • Power-actuated safety relief valve - A pressure relief valve in which the major pressure relieving device is combined with, and controlled by, a device requiring an external source of energy.

The following types of safety valve are defined in the DIN 3320 standard, which relates to safety valves sold in Germany and other parts of Europe:

  • Standard safety valve - A valve which, following opening, reaches the degree of lift necessary for the mass flowrate to be discharged within a pressure rise of not more than 10%. (The valve is characterised by a pop type action and is sometimes known as high lift).
  • Full lift (Vollhub) safety valve - A safety valve which, after commencement of lift, opens rapidly within a 5% pressure rise up to the full lift as limited by the design. The amount of lift up to the rapid opening (proportional range) shall not be more than 20%.
  • Direct loaded safety valve - A safety valve in which the opening force underneath the valve disc is opposed by a closing force such as a spring or a weight.
  • Proportional safety valve - A safety valve which opens more or less steadily in relation to the increase in pressure. Sudden opening within a 10% lift range will not occur without pressure increase. Following opening within a pressure of not more than 10%, these safety valves achieve the lift necessary for the mass flow to be discharged.
  • Diaphragm safety valve - A direct loaded safety valve wherin linear moving and rotating elements and springs are protected against the effects of the fluid by a diaphragm.
  • Bellows safety valve - A direct loaded safety valve wherin sliding and (partially or fully) rotating elements and springs are protected against the effects of the fluids by a bellows. The bellows may be of such a design that it compensates for influences of backpressure.
  • Controlled safety valve - Consists of a main valve and a control device. It also includes direct acting safety valves with supplementary loading in which, until the set pressure is reached, an additional force increases the closing force.

EN ISO 4126 lists the following definitions of types of safety valve:

  • Safety valve - A safety valve which automatically, without the assistance of any energy other than that of the fluid concerned, discharges a quantity of the fluid so as to prevent a predetermined safe pressure being exceeded, and which is designed to re-close and prevent further flow of fluid after normal pressure conditions of service have been restored. Note; the valve can be characterised either by pop action (rapid opening) or by opening in proportion (not necessarily linear) to the increase in pressure over the set pressure.
  • Direct loaded safety valve - A safety valve in which the loading due to the fluid pressure underneath the valve disc is opposed only by a direct mechanical loading device such as a weight, lever and weight, or a spring.
  • Assisted safety valve - A safety valve which by means of a powered assistance mechanism, may additionally be lifted at a pressure lower than the set pressure and will, even in the event of a failure of the assistance mechanism, comply with all the requirements for safety valves given in the standard.
  • Supplementary loaded safety valve - A safety valve that has, until the pressure at the inlet to the safety valve reaches the set pressure, an additional force, which increases the sealing force. Note; this additional force (supplementary load), which may be provided by means of an extraneous power source, is reliably released when the pressure at the inlet of the safety valve reaches the set pressure. The amount of supplementary loading is so arranged that if such supplementary loading is not released, the safety valve will attain its certified discharge capacity at a pressure not greater than 1.1 times the maximum allowable pressure of the equipment to be protected.
  • Pilot operated safety valve - A safety valve, the operation of which is initiated and controlled by the fluid discharged from a pilot valve, which is itself, a direct loaded safety valve subject to the requirement of the standard.

The following table summarises the performance of different types of safety valve set out by the various standards.

View the Seller's ProductsCompany Other Products

Ductile Iron Pipes - DN 80/1400 - ISO2531 / EN545 / EN598

Large Stock of Ductile Iron Pipes, manufactured in Europe, ready for dispatch. Inside lining: blast furnace cement mortar, outside coating: galvanised and bituminous coating. Avg pipe lenght 6 met...

Steel Piles - Structural Pipes

We suppy all elements to manufacture on site structural piles, composed of: - pipes with large wall thickness- rings- flanges- stee angles and special cut steel parts We deliver pipes confiorming ...

Fast Feedback

Enter your inquiry details such as:

■ Self-introduction

■ Required specifications

■ Inquire about price/MOQ

Related Products

Best-selling safety valve series product for sale

best-selling safety valve series product for salesafety valve is our special product,and it is used for draining sewage.In such foreign countries as Spain or America, it is usually named as duckm...

Nozzle & Safety Valves

Our nozzle & safety valves are made of mid-size and heavy-duty solid brass. We provide four large openings at nozzle tip for full flow. Further, we also added front and rear O-ring seals for l...

Brass Safety Valve

315-M1 Safety Valve♥ Our new factoryIndustrial area covered:40,000 square metersThe time of trial operation: in June , 2012Invested in 50 million yuanIt is 20 kilometers far from downtown,...

brass safety valve

ZINC SAFETY VALVE (JD-2033) Body :zinc with nickel platedSpring : Stainless steelGasket: NBRSize: 1/2Package: Standard export packaging .We will use stamdard export package if no special requ...

pressure safety valve

Negative pressure relief valve (standard accessory for roots blower) 1. Certificate:ABS,GL,LR,RINA,BV,DNV,NK,KR,CCS 2. Standard:CB/T3819 3. Pressure: PN1.0MPa 4. Size:DN50-500mm 5. Aluminum Bron...

ZL-713 safety valve

ZL-713 safety valve• Normal:0.65-0.75Mpa• Normail bore:25-150MM• Applicable medium:air, water• Material:brass with Nickle heating• Applicable temperature:-30°c-120°...


  • Switzerlandnerror="'none';">Switzerland
  • Manufacturers
  • Mr.Fabrizio Sutera
  • 0041-33-5349832
  • 0041-43-5080059
  • Bruenigstrasse 20
cript type="text/javascript"> var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-16649816-1']); _gaq.push(['_trackPageview']); (function() { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + ''; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })(); cript> cript type="text/javascript" charset="utf-8"> var pageOptions = { 'pubId': 'pub-2775822834436782', // Enter your own pubId here! 'query': "Safety Valves (Oil, Gas, Water)", 'lines': 2, 'titleBold': true, // 'colorAdSeparator' : '#F0F5F5', // 'verticalSpacing' : 12, 'adPage': '1', //'rolloverAdBackgroundColor': '#FFF6EB', 'linkTarget': '_blank', 'colorDomainlink': '#174690', 'colorText': '#333333', 'rolloverlinkColor': '#FF6600', 'colorTitlelink': '#06c', 'adsafe': 'low', 'numRepeated': 3, 'fontFamily': 'arial', 'fontSizeTitle': '14px', 'fontSizeDescription': '12px', 'fontSizeDomainlink': '12px' }; var adblock1 = { 'channel': '3824692353', 'container': 'adblock1', 'width': '270px', 'number': 5 }; if (!1) { _googCsa('ads', pageOptions, adblock1); } cript>
more»other products

[ Productssearch ]  [ favorites ]  [ Tell friends ]  [ Print ]  [ Close ]

Index: 0-9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z